ANYCUBIC Exposure Times on DruckWege Resins

ANYCUBIC Exposure Times on DruckWege Resins

DruckWege Resins on ANYCUBIC Photon

1 AUG 2018 – This blogpost gives some summarized results on the settings for DruckWege Resins on the ANYCUBIC Photon DUP 3D Printer. We will update the table gradually and update through new posts on ANYCUBIC exposure times for our resins. Once gathered on all resin types for DruckWege materials, we will issue a material guide this year enabling all material info at a glance.

ANYCUBIC Resin Settings

The ANYCUBIC 3D printer resin settings to be adjusted in the slicer software, can be adapted for DruckWege resins at the following parameters, whereas the table is for Baselayer (seconds) / Regular Layer (seconds) / Layer height (millimeters), used at 8 baselayers in general:

Type D Blue Standard 140s/18s/0.1mm
Type D Grey Standard 140s/13s/0.1mm
Type D Orange Standard
140s/13s/0.1mm
Type D Pigment-free/ClearStandard
60s/10s/0.1mm
Type D Black Standard
140s/18s/0.1mm and 120s/17s/0.05mm
Type D Green Standard 110s/9.5s/0.1mm
Type D Red Standard 80s/10s/0.1mm
Type D Pro Black 140s/15s/0.05mm
Type D Pro Flex Clear 120s/17s/0.1mm
Type D Dental Standard 130s/12s/0.1mm

Leave a Reply